Welsh Models standard VC10 kit

A place to discuss scale variants of the VC10 design. Topics about die-cast models, kits or any other scale versions are welcome.
Post Reply
vc10project
Posts: 5
Joined: Tue May 26, 2015 7:03 pm
Location: near to EGNH
Contact:

Welsh Models standard VC10 kit

Post by vc10project » Sat Jul 25, 2015 12:30 pm

Hi all

I have an unbuilt Welsh Models 1/144th vacform/resin kit of a standard VC10 with both BUA and BOAC decal sets. I just don't have the time to build it, so I will offer it for 'rehoming' to someone on the forum. I will post this to anywhere in the UK FOC & within the EU at cost, with two caveats:

1. Whoever secures the kit needs to send me some photos when it's built
2. I would appreciate one of the self-adhesive Vickers Armstrong logo stickers that are being sold on eBay to support ZD241
3. I know I said 2 but I would also appreciate a visit to my website as well (www.vc10project.co.uk), although that is optional!

Please post here or PM me to secure the kit!

Best wishes

Mark
Best wishes

Mark
www.vc10project.co.uk

vc10project
Posts: 5
Joined: Tue May 26, 2015 7:03 pm
Location: near to EGNH
Contact:

Re: Welsh Models standard VC10 kit

Post by vc10project » Fri Jul 31, 2015 4:53 pm

No takers? Not a problem, but if no-one shows any interest in the next week I will list it for sale on eBay, so if you are interested do get in touch!

Best wishes

Mark
Best wishes

Mark
www.vc10project.co.uk

User avatar
Tonkenna
Posts: 683
Joined: Sat Aug 10, 2002 7:32 pm
Location: Boldly going!
Contact:

Re: Welsh Models standard VC10 kit

Post by Tonkenna » Fri Jul 31, 2015 9:18 pm

Its a great offer, but sadly I am rubbish at modelling lol

Andy :D
Please check out my Flickr account: http://www.flickr.com/photos/zz330/

Jelle Hieminga
Webmaster
Posts: 750
Joined: Fri Aug 02, 2002 9:03 pm
Location: Amsterdam
Contact:

Re: Welsh Models standard VC10 kit

Post by Jelle Hieminga » Fri Jul 31, 2015 10:09 pm

I've built quite a few models but that was a long time ago. Also, I've never been brave enough to attempt a vac-form kit. I guess I'll better pass on this offer.
Buttons . . . check. Dials . . . check. Switches . . . check. Little
colored lights . . . check.

vc10project
Posts: 5
Joined: Tue May 26, 2015 7:03 pm
Location: near to EGNH
Contact:

Re: Welsh Models standard VC10 kit

Post by vc10project » Sun Aug 02, 2015 9:45 am

Not a problem! Just thought I'd give the forum first option. I've now listed it on eBay.

Best wishes

Mark
Best wishes

Mark
www.vc10project.co.uk

Post Reply