New Corgi model due in the shops soon (Feb 2009)

A place to discuss scale variants of the VC10 design. Topics about die-cast models, kits or any other scale versions are welcome.
Post Reply
Jelle Hieminga
Webmaster
Posts: 788
Joined: Fri Aug 02, 2002 9:03 pm
Location: Amsterdam
Contact:

New Corgi model due in the shops soon (Feb 2009)

Post by Jelle Hieminga »

I just received an e-mail from Corgi stating that they will be releasing the VC10K.2 Tanker model next week. Details at corgi here: http://www.corgi.co.uk/CorgiSite/pages/ ... ctlg=Corgi

Corgi has had problems with their first 1:144 VC10 model and because of this had to rethink their tooling and printing. Let's hope that this model has solved those issues!
Buttons . . . check. Dials . . . check. Switches . . . check. Little
colored lights . . . check.
User avatar
Tonkenna
Posts: 684
Joined: Sat Aug 10, 2002 7:32 pm
Location: Boldly going!
Contact:

Re: New Corgi model due in the shops soon (Feb 2009)

Post by Tonkenna »

About time!!!!!

Tonks :mrgreen:
Please check out my Flickr account: http://www.flickr.com/photos/zz330/
nickwilcock
Posts: 29
Joined: Wed Dec 10, 2008 2:21 pm

Re: New Corgi model due in the shops soon (Feb 2009)

Post by nickwilcock »

A pity that the probe is the wrong colour and the nose gear doors appear to have drooped open.... I'm not sure that the tail code letter is the right size either.

Just in time for the 25th anniversary of 101 Sqn's reformation with the VC10 tanker, eh Tonks? Has anything been planned to celebrate this milestone?
Jelle Hieminga
Webmaster
Posts: 788
Joined: Fri Aug 02, 2002 9:03 pm
Location: Amsterdam
Contact:

Re: New Corgi model due in the shops soon (Feb 2009)

Post by Jelle Hieminga »

The photos I linked to are from pre-production versions of the Corgi models and may not be representative of the finished article. Also these were produced before the retooling that was ordered after the first Corgi VC10 hit the market so I'm expecting the newer models to look better than that.

Apparently the BA model (G-ARVM) is also available in the shops now, I guess I missed that announcement. That just leaves the BOAC G-ARVA version and sources tell me it is due in three months. My local supplier hasn't got ZA140 or G-ARVM yet so I cannot get any photos of the improved models.
Buttons . . . check. Dials . . . check. Switches . . . check. Little
colored lights . . . check.
User avatar
Tonkenna
Posts: 684
Joined: Sat Aug 10, 2002 7:32 pm
Location: Boldly going!
Contact:

Re: New Corgi model due in the shops soon (Feb 2009)

Post by Tonkenna »

Well I am waiting for my K2 to arrive... I hope the probe is not white!!!

Not heard anything Nick... will look into that!

Tonks 8)
Please check out my Flickr account: http://www.flickr.com/photos/zz330/
User avatar
Tonkenna
Posts: 684
Joined: Sat Aug 10, 2002 7:32 pm
Location: Boldly going!
Contact:

Re: New Corgi model due in the shops soon (Feb 2009)

Post by Tonkenna »

Got mine today, and it is not too bad... a few things are slightly wrong, and the centreline hose tunnel is painted on and not part of the model (which is a shame)... looks ok and is better than the C1!

Image

Image
Close up of the cockpits and the different approach this time...

Image
My collection...

Tonks :D
Please check out my Flickr account: http://www.flickr.com/photos/zz330/
Jelle Hieminga
Webmaster
Posts: 788
Joined: Fri Aug 02, 2002 9:03 pm
Location: Amsterdam
Contact:

Re: New Corgi model due in the shops soon (Feb 2009)

Post by Jelle Hieminga »

A welcome visit from UPS this morning, delivering a largish box.
Corgi_ZA140_1.jpg
From photos of the C1 I had my doubts about the cockpit area but now that they've painted the windows on I think the overall shape looks pretty good. As Tonks mentions there are some small issues, the centreline hose, the freight hold door on the wrong side and a funny window in the forward door. Still it is a very nice model to look at. The other model is G-ARVM and that is very nice too. A bit shiny (I doubt that they were ever that clean in service) but there are fewer mistakes to point out, mostly because of a lack of detailing (the freight hold doors are not printed) but they don't distract from the overall impression.

The G-ARVM model is now available for orders from Corgi, see here.
Attachments
Corgi_ZA140_2.jpg
Corgi_ZA140_3.jpg
Corgi_ZA140_4.jpg
Corgi_VM_1.jpg
Buttons . . . check. Dials . . . check. Switches . . . check. Little
colored lights . . . check.
Jelle Hieminga
Webmaster
Posts: 788
Joined: Fri Aug 02, 2002 9:03 pm
Location: Amsterdam
Contact:

Re: New Corgi model due in the shops soon (Feb 2009)

Post by Jelle Hieminga »

That makes 4 for my VC10 collection by the way! 8)
Attachments
VC10s_2.jpg
VC10s_1.jpg
Buttons . . . check. Dials . . . check. Switches . . . check. Little
colored lights . . . check.
LSS
Posts: 152
Joined: Fri Jun 03, 2005 6:36 pm

Re: New Corgi model due in the shops soon (Feb 2009)

Post by LSS »

Nice models =D>
User avatar
1103
Posts: 157
Joined: Sun Jul 13, 2003 4:14 pm
Location: About 5 miles from Wisley Airfield

Re: New Corgi model due in the shops soon (Feb 2009)

Post by 1103 »

Got my G-ARVA model yesterday. I noticed the pax doors (at least this one has doors!) on the model are the same size as the RHS service doors. I also think, at first glance, the engine nacelles are upside down, I will check them on my engineering drawings when my shift finishes and I get a few days off.
Image
and in its new home
Image
Post Reply